Holux GR-239 User Manual download pdf (Page 3)

4. Establish Bluetooth Link

Note about Bluetooth Connection

When you power on the GR-239, you must wait five seconds for Bluetooth to self-test

before a connection is established. Wait until the Bluetooth light begins to flash (once

every second). A Bluetooth link can now be established between a PDA and the GR-239.

5. Install and Open the GPS Viewer

Warning

Do not place the GR-239 under strong sunlight for a long time. Do not place

it in a high-temperature environment, or near heat radiating devices such

as a stove or radiator. Doing so will cause the device to malfunction. For

further information, refer to the user manual that comes on the supplied CD.

[Notes]

1. It is prohibited to operate this system while driving your car.

2. GPS signals are unable to go through non-transparent objects, such as

tall buildings, tunnels, underpasses, and forests. Bad weather may also

effect the signal reception. If your car window heat shield contains metal,

the receiver will not be able to pick up GPS signals.

• You can install the GPS viewer program from

the supplied CD to check current positioning

and satellite signal reception.

• Activate the GPS Viewer, set the Baud Rate

to 38400, and press Scan for automatic

scanning. Once you find the correct COM

port, choose GPS status to start viewing.

• Refer to the “Software Installation” section for

details if you have any problems with

installation and use.

To link the receiver with a PDA (Personal Digital

Assistant), follow these steps:

• Activate the Bluetooth Manager, select

Search and then link.

• Select the HOLUX GR-239 icon and choose

SPP slave to establish the Bluetooth link.

• Refer to the “Software Installation” section in

the user manual for further details if you have

any problems establishing the link.

1 2 3 4

No comments

Holux GR-239 User Manual Page 3